Newbridge NB3944-X Dual Band 4×4 WIFI 6 Access Point
Newbridge NB3944-X is the indoor wall/ceiling mount wireless access point the delivers high performance.
Excellent Wi-Fi 6 (802.11ax) performance with dual radios, eight spatial stream (4×4:4 in 5GHz, 4×4:4 in 2.4GHz)
Newbridge NB3944-X is designed with enhanced RF transmission technology, providing greater coverage and higher signal quality, and can be widely used in carrier, enterprise, industry and other markets.
Newbridge NB3944-X is a Wi-Fi 6 access points provide high-performance connectivity for any organisation experiencing growing numbers of IoT and mobility requirements. With a maximum real-world aggregate data rate of 3.65 Gbps, deliver the speed and reliability needed for any enterprise. Furthermore, 2.5GbE Ethernet ensures the backhaul will not be a bottleneck for full use of available Wi-Fi capacity.
Orthogonal frequency-division multiple access (OFDMA), bi-directional multi-user MIMO and cellular optimization. With up to 4 spatial streams (4SS) and 160MHz channel bandwidth (VHT160), NB3944-X suitable in any high-density deployment such as university campus, concert, gymnasium, etc.
NB3944-X provides connectivity for a maximum of 512 associated clients per radio (1024 in total). In real-world scenarios, the maximum recommended client density is dependent on environmental conditions.
• WIFI 6 Access Point
• Point-to-MultiPoint High Capacity Wireless Bridge
• Wireless Customer-Premises Equipment (CPE)
Band-steering
The NB3944-X supports the spectrum radio navigation feature which guides and initiates association with dual-band clients. When the 5 GHz RF has less online client, dual-band clients will be redirected to the 5 GHz radio. The same applies to 2.4 GHz RF, dual-band clients will be redirect to the 2.4 GHz radio when the 2.4GHz RF has less online clients.
Multicast optimization
Multicast optimization converts multicast packets of destination address into unicast packets. With this wireless forwarding, high speed forwarding multicast members can be achieved, optimizing wireless multicast data forwarding.
Roaming steering
Client roaming can be navigated through the rejection of weak signal access and reconnection trigger for clients. Rejection of weak signal access can effectively prevent the access of clients with weak signals, further guiding the client to associate to a stronger RF signal. When a wireless client moves from one coverage area to another RF coverage area, the original coverage signal will become less, causing degradation of network connectivity. Client reconnection trigger helps initiate and trigger the client connect to a stronger RF signal.
Enhanced RF technology
Supports maximum transmit power of 22~23dBm (EIRP), providing greater coverage, further reducing deployment density. With high-gain internal antenna, it covers more than 900 square meters of meeting place and studio. Improved receiver sensitivity provides better communication with the tablets, mobile phones and other handheld devices.
Download Product Datasheet: Click Here