Newbridge AP-3944 Dual Band 4×4 Mimo Access Point
Newbridge AP-3944 is the indoor wall/ceiling mount wireless access point the delivers high performance.
4×4 2.4GHz radio, up to 800Mbps physical data rate | 4×4 5GHz radio, up to 1733Mbps physical data rate | Supports Multi-User MIMO (MU-MIMO)
Newbridge AP-3944 is designed with enhanced RF transmission technology, providing greater coverage and higher signal quality, and can be widely used in carrier, enterprise, industry and other markets.
AP-3944 supports 802.11a/b/g/n/ac Wave 2 protocol standard, built-in IEEE 802.11n 2.4GHz 4x4 MIMO with up to 800Mbps throughput and 5GHz 4x4 MIMO with up to 1,733Mbps throughput. Both radios are high performance and high density ready to support multi- user MIMO (MU-MIMO) and 4 spatial access point streams (4SS).
AP-3944 uses the industry’s best chipset and components in order to provide excellent performance and competitive pricing. Designed with a plastic shell and an aluminum base, the design helps enhance the cooling effect, while the built-in antenna supports both ceiling and wall installations. Using the elegant flying saucer design, multi-vents are designed to effectively remove heat, extending equipment life.
AP-3944 promotes energy-saving, providing 500mW of transmit power while maintaining the total power consumption to less than 16W at any time. It also supports PoE+ power input.
• 802.11g/n + 802.11ac/a/n MU-MIMO Access Point
• Point-to-MultiPoint High Capacity Wireless Bridge
• Wireless Customer-Premises Equipment (CPE)
Band-steering
The AP-3944 supports the spectrum radio navigation feature which guides and initiates association with dual-band clients. When the 5 GHz RF has less online client, dual-band clients will be redirected to the 5 GHz radio. The same applies to 2.4 GHz RF, dual-band clients will be redirect to the 2.4 GHz radio when the 2.4GHz RF has less online clients.
Multicast optimization
Multicast optimization converts multicast packets of destination address into unicast packets. With this wireless forwarding, high speed forwarding multicast members can be achieved, optimizing wireless multicast data forwarding.
Roaming steering
Client roaming can be navigated through the rejection of weak signal access and reconnection trigger for clients. Rejection of weak signal access can effectively prevent the access of clients with weak signals, further guiding the client to associate to a stronger RF signal. When a wireless client moves from one coverage area to another RF coverage area, the original coverage signal will become less, causing degradation of network connectivity. Client reconnection trigger helps initiate and trigger the client connect to a stronger RF signal.
Enhanced RF technology
Supports maximum transmit power of 26dBm (EIRP), providing greater coverage, further reducing deployment density. With high-gain internal antenna, it covers more than 900 square meters of meeting place and studio. Improved receiver sensitivity provides better communication with the tablets, mobile phones and other handheld devices.
RF PERFORMANCE TABLE - 2.4GHZ
RF PERFORMANCE TABLE - 5GHZ
3D RADIATION PATTERN OF EACH ELEMENT
Download Product Datasheet: Click Here